From ducted to ductless, wall-mounted to floor-mounted, and single-zone to multi-zone, Mitsubishi has the solution for your home comfort. Check out the different types of units below to see which is best for your home, along with the advanced technology featured in each type.
Key Features
Below are the various features that are built into the different Mitsubishi units.
Single vs Multi-zone
With a single-zone system, one outdoor unit connects to one indoor unit to provide comfort in one zone. With a multi-zone system, one outdoor unit connects to up to eight indoor unit to provide comfort in multiple zones.
3D i-See Sensor
The sensor works by thermally scanning the interior space for hot and cold spots to deliver the precise desired temperature.
The sensor divides the space in 3D zones, continuously measuring the temperature of each to detect the exact position of heat signatures. By creating the 3D profile, the sensor can even differentiate between when the space is occupied versus empty. When the space is occupied, the sensor identifies the heat signatures and directs the indoor unit to send cool or warm air as needed. The system may also be customized to direct the unit to send cool or warm air away from the heat signature.
Econo Cool
This feature adjusts the amount of air directed towards occupants based on the air-outlet temperature.
Nano-platinum Filter
The Nano-platinum Filter uses nanometer-sized platinum-ceramic particles that deodorize air and kill bacteria.
Electro-static Anti Allergy Enzyme Filter
This filter is charged with static electricity to attract and capture dust particles, bacteria, and molds and break them down into enzymes.
Swing Mode
Units with the Swing Mode capability can move air throughout the room like an oscillating fan.
Powerful Mode
This setting temporarily raises or drops the set temperature for 15 minutes so that automatic fan speed adjustments (made possible by the INVERTER) will more quickly bring your room to the desired temperature.
Light Commercial
This feature means that a unit is suitable for light commercial settings such as restaurants, classrooms, retail, and small offices.
Types of Indoor Units
Wall-mounted
Wall-mounted units are the most popular and versatile type of indoor ductless unit. These units sit high on the wall and come in different styles to match your décor needs. They are equipped with advanced filters and are great for both residential and commercial use.
FS Model
The FS model is a newer, popular style for many homeowners. With its 3D i-See Sensor, the unit can detect occupancy and direct tempered air can towards or away from occupants for maximum comfort. Sound levels can be as low as 20 decibels, which can be compared to the sound of a ticking watch. Plus, high-quality air filters eliminate unwanted smells and allergens. The FS model is also equipped with Dual Barrier Coating, which protects the interior of the unit against the build up of dust, dirt, and oil, thereby reducing maintenance and increasing lifespan and efficiency. Check out the FS model in action below.
Features: single or multi-zone, 3D i-See Sensor, Econo Cool, Nano-platinum Filter, Electro-static Anti Allergy Enzyme Filter, Swing Mode, Powerful Mode
GL Model
The GL model has the lowest noise levels in the industry at only 19 decibels, making it suitable for any home. Plus, it comes in a wide range of sizes and a more compact design so that it can fit in any space. This model also has the option for a cooling only unit in climates where heating is unnecessary.
Features: single or multi-zone, Econo Cool, Nano-platinum Filter, Electro-static Anti Allergy Enzyme Filter, Swing Mode, Powerful Mode
EF Model
The Designer Series EF model combines state of the art technology with sleek design. With finishes in glossy black, matte silver, or glossy white, this unit can complement any room. Not only will it blend in to your décor, but you'll also barely hear it as it operates as low as 21 decibels.
Features: multi-zone, Econo Cool, Nano-platinum Filter, Electro-static Anti Allergy Enzyme Filter, Swing Mode
D Model
These large capacity units are great for bigger rooms to ensure air reaches every corner. Whether it be a great room in your home or a dining area in your restaurant, this single-zone unit will create wall to wall comfort.
Features: single-zone, Econo Cool, Swing Mode, Powerful Mode, Light Commercial
PKA Model
These light commercial models are perfect for small offices, classrooms, daycare centers, server rooms, and more.
Features: single-zone, 3D i-See Sensor, Swing Mode, Light Commercial
HM Model
The HM model is one of the more basic wall-mounted options, great for heating/cooling single zones. If you are not as interested in the technological features and budget is more important, this model would be for you. It operates at a noise level as low as 22 decibels.
Features: single-zone, Econo Cool, Swing Mode
JP Model
This unit is available as a single-zone 115-volt heat pump, making it ideal for homes or commercial properties with electrical service restrictions.
Features: single-zone, Econo Cool, Light Commercial
Floor-mounted
These units sit low on the wall and are partially recessed into the wall. They are perfect for replacing radiators or heating/cooling additions and can be used in residential and commercial spaces.
KJ Model
The KJ floor-mounted model is built with H2i Hyper-Heat technology, ideal for those in colder climates. Whereas standard heat pumps lose efficiency when the temperature reaches around 25 degrees Fahrenheit outside, Hyper-Heat systems operate until the temperature reaches as low as negative 13 degrees.
Features: single or multi-zone, 3D i-See Sensor, Econo Cool, Nano-platinum Filter, Electro-static Anti Allergy Enzyme Filter, Swing Mode, Powerful Mode
Ceiling-mounted
These units can be in the form of ductless cassettes installed flush to the ceiling and ductless ceiling-suspended units for light commercial settings.
MLZ Model
The MLZ ceiling cassette features a sleek, narrow design that rests flat against the ceiling and takes up minimal space. It's ideal for retrofits and works in both residential and light commercial spaces. In addition, it comes equipped with a service panel that's easily accessed from below, plus advanced filtration and auto vane technology to adjust air direction based on your needs.
Features: single or multi-zone, Econo Cool, Swing Mode
SLZ Model
This unit is specifically designed to fit into a two-by-two-inch suspended ceiling grid and is mounted flush with the ceiling. The four-way outlet works to evenly distribute airflow throughout the entire room, and the option for the 3D i-See Sensor allows for even more precise comfort.
Features: single or multi-zone, 3D i-See Sensor, Econo Cool, Swing Mode, Light Commercial
PLA Model
The PLA model fits into standard ceiling tiles and is suitable for larger rooms and open floor plans such as office, school and retail settings. The four-way outlets with individual vane settings permit up to 72 different airflow patterns, providing maximum comfort.
Features: single or multi-zone, 3D i-See Sensor, Econo Cool, Swing Mode, Light Commercial
PCA Model
These single and multi-zone models are suspended from the ceiling and are ideal for larger spaces. They also have the option of the 3D i-See Sensor.
Features: single or multi-zone, 3D i-See Sensor, Swing Mode, Light Commercial
Horizontal ducted
These units are flexible in design and perfect for residential and hospitality settings.
SEZ Model
The horizontal-ducted indoor SEZ unit is designed to heat/cool rooms through a short duct run. The SEZ is a low-static unit, meaning it operates at a sound level no higher than 34 dB(A), contributing very little noise to the room. This model produces a noise level as low as 23 dB(A), which is equivalent to a whisper. The SEZ series may be mounted in the attic, hidden in the ceiling or beneath the floor, or concealed behind a wall.
Features: single or multi-zone, 3D i-See Sensor, Econo Cool, Nano-platinum Filter, Electro-static Anti Allergy Enzyme Filter, Swing Mode, Powerful Mode
PEAD Model
This model offers low capacities suitable for Passive Houses and large capacities suitable for light commercial spaces. These medium static units can provide comfort in larger spaces using a longer duct run. The PEAD series may be mounted in the attic, hidden in the ceiling or beneath the floor, or concealed behind a wall.
Features: single or multi-zone, 3D i-See Sensor, Econo Cool, Nano-platinum Filter, Electro-static Anti Allergy Enzyme Filter, Swing Mode, Powerful Mode
Ducted air handlers
These air handlers can provide powerful cooling and heating with or without ductwork. Designed with compact cabinets, they are ideal for residential or light commercial spaces. INVERTEN-driven technology also provides efficiency and makes for a great upgrade from furnace and air handler systems.
SVZ Model
The SVZ is compact and quiet and uses INVERTED technology to deliver high efficiency and comfort. With higher efficiency, homeowners can also enjoy savings on energy bills.
Features: single or multi-zone
PVA Model
This unit is ideal for larger homes, multi-family buildings, and light commercial spaces. It can be installed both horizontally or vertically to meet spacing needs.
Features: single or multi-zone
If you live in the Delaware Valley/Greater Philadelphia area and would like to find comfort within your home, visit our website or give us a call at 215 - 245 - 3200 to learn more.
Contact us below to schedule a free Mitsubishi consultation.
